Accessories for 5 ml tubes

Polycarbonate freezer box for 5ml tubes 

Features

• Suitable for -190 °C
• 13,33 x 13,33 x 6,99 cm 
• 25x5ml tubes

Tube clip for CLEARLock™  5ml microtubes in PP with secure locking system (10 pcs.)

Product Information

Tube clip for CLEARLock™ 5ml microtube in polypropylene with secure locking system. 
Use the tube clip at temperature above 80 °C to prevent cap opening and consequent sample loss

Features

• Ergonomic shape with grooved sides for a better grip
• Withstand high speed centrifugation up to 25.000 x g
• Use at temperature above 80°C during boiling procedures

5ml / 15 mL tube rack, 40 wells, green/blue color. 

Features

• 2 moving hinged upper shelves able to hold 5 mL or 15 mL tubes (up to 16 mm in diameter)
• Tear drop shaped openings for a better retention of tubes
• Ergonomic handles for ease of transporting the rack
• Molded grid on both sides of the shelves for quick sample identification and retrieval
• Dimensions : 30,9 x 10,7 x 7,7 cm
• Autoclavable at 121 °C for 15 min.

5 ml acrylic tube rack.

Features

• In crystal clear acrylic
• For 20 x 5 ml tubes
• Supported at two levels in the rack

5ml / 15 mL tube rack, 40 wells, purple/white color.

Features

• 2 moving hinged upper shelves able to hold 5 mL or 15 mL tubes (up to 16 mm in diameter)
• Tear drop shaped openings for a better retention of tubes
• Ergonomic handles for ease of transporting the rack
• Molded grid on both sides of the shelves for quick sample identification and retrieval
• Dimensions : 30,9 x 10,7 x 7,7 cm
• Autoclavable at 121 °C for 15 min.

Adapter for 0.5 mL and 2 mL cryovials and 1.5 - 2 mL HPLC vials (4 pcs.)

Adapter for 0.2 mL tubes (6 pcs.)

Adapter for 0.5 mL tubes (6 pcs.)

MyFuge 5 microcentrifuge.

Product Information

The myFuge™ 5 microcentrifuge includes a four position rotor for compatibility with a variety of 5ml test tubes, including 5ml snap cap  centrifuge  tubes.  

In  addition,  this  combination  rotor  has  four additional  slots  for  contrifuging  standard  microtubes  (1.5/2.0ml). 

Simply  close  the  lid  and  the  centrifuge  will  quickly  accelerate  to reach  the  fixed  speed  of  5,500  rpm.  Open  the  lid,  and  the  rotor decelerates to a stop for removing samples.

The  5ml  rotor  position  accepts  5ml  centrifuge  tubes  (snap  cap) directly. While 5ml blood and culture tubes (12x75mm) and cryovials are  also  accepted  with  the  included  adapters.  

The  microtube positions are designed to accept 0.5 and 0.2ml tubes with the use of optional adapters.

Features

• For quick spin downs of 5 mL and 1.5/2 mL tubes
• Includes adapters for 12 x 75 mm tubes
• Starts and stops with closing/opening of the lid
• Capacity : 4 x 5 mL tubes and 4 x 1.5/2 mL tubes